Kia Carens CRDI Swirl Flap Delete Plug Set (1.6 & 1.7 Engines)

This Kia Carens Swirl Flap Delete Plug Set is intended for compatible 1.6 CRDi and 1.7 CRDi intake manifolds where the original swirl flap mechanism is being removed.

Swirl flaps are used within the intake system to influence airflow under specific engine operating conditions. Over time, the mechanism may develop wear, play or faults depending on the condition and configuration of the intake system.

These delete plugs are used to seal the corresponding openings after removal of the original swirl flap components as part of a properly planned intake-system modification.

• Manufacturer: Kia
• Model: Carens
• 1.6 CRDi listed years: 2012–2018
• 1.7 CRDi listed years: 2012–2016
• Product Type: Swirl Flap Delete Plug Set

Compatibility must be confirmed before ordering. The plug set and relevant OEM references depend on the engine and intake-manifold configuration fitted to the vehicle.

Do not select the product based only on the model name or production year. Confirm whether your Kia Carens uses the 1.6 CRDi or 1.7 CRDi engine and compare the original intake-manifold reference.

If you are unsure about fitment, contact Art of Speed with your VIN, engine information and photographs of the intake manifold.

For Kia Carens 1.6 CRDi applications:

• 283102A690
• 283102A760

For Kia Carens 1.7 CRDi applications:

• 283102A801
• 283102A802
• 283102A803
• 283102A804
• 283102A570

OEM numbers are provided as compatibility references only. Always confirm the reference fitted to the vehicle before ordering.

• Designed for compatible Kia Carens CRDi applications
• Available for selected 1.6 CRDi and 1.7 CRDi intake manifolds
• For swirl flap delete modifications
• Manufactured from ASA PolyLite
• Designed to close the openings left after swirl flap removal
• Suitable for motorsport and off-road projects
• Compatibility can be checked using the listed OEM references

ECU software modification is required.

Mechanical removal of the swirl flap system may require the corresponding control function to be disabled in the vehicle's engine-management software.

Removing the actuator or control valve without addressing the ECU strategy may result in diagnostic fault codes or incorrect engine-management behaviour.

ECU software changes should be carried out by an experienced automotive calibration specialist.

Professional installation is strongly recommended.

Installation involves removal of the intake manifold and modification of the original swirl flap system.

The intake manifold should be inspected for contamination, wear, damage or other issues while removed from the vehicle.

After installation, verify that the intake system is correctly sealed and that the ECU software has been configured appropriately.

Is this kit compatible with the Kia Carens?

It is intended for selected Kia Carens 1.6 CRDi and 1.7 CRDi applications. Compatibility depends on the intake-manifold configuration and OEM reference fitted to the vehicle.

Which Kia Carens engines are listed?

The listed applications are 1.6 CRDi from 2012–2018 and 1.7 CRDi from 2012–2016.

What does a swirl flap delete plug set do?

The plugs are used to close the relevant openings in the intake manifold after removal of the original swirl flap components.

Is ECU software modification required?

Yes. Depending on the original engine-management strategy, the swirl flap control function may need to be disabled in the ECU software after the mechanical modification.

How do I know which OEM references to check?

First confirm whether your Kia Carens uses the 1.6 CRDi or 1.7 CRDi engine. Then compare the original intake-manifold reference with the corresponding OEM numbers listed above.

Is this product intended for road use?

No. This product is intended for off-road and motorsport applications only.